Rud

General: Octagonal lifting eye approved for lifting. Axial lifting is allowed (with reduction of WLL) but we strongly recomment to use the Rud RM lifting eye only for straight lifting. For axial lifting we reccomend the use of rotatable liftting eyes which can be adjusted to the direction of pull.

Applied harmonized norms: DIN EN 1677-1: 2009-03 + DIN EN ISO 12100: 2011-03 

  • Material: Forged high tensile steel.
  • Marking: According to standard, CE-marked
  • Temperature range: -40° up to 200°C (no reduction of WLL)
  • Standard: EN 1677-1
  • Warning: RUD RM eye nuts are only to be used with bolts or threaded studs with a min. quality class 8.8 and who are 100 % crack detected. Non certified bolts or threaded studs are not allowed.
  • Safety factor: 4:1
  • Grade: 8
RUDFORM copy
Select a row from the table below, then click the add to quote button
Part Code WLL Thread
mm
WLL 90° tons Dimensions
mm
A
mm
B
mm
C
mm
D
mm
E
mm
T
mm
Weight
kg
CAD
11.4055254 0.4 M6 0.1 6 12 11 10 25 25 34 0.1
11.4055255 0.8 M8 0.2 8 12 11 10 25 25 34 0.1
11.4055258 1 M10 0.25 10 12 11 10 25 25 34 0.1
11.4055271 1.6 M12 0.24 12 14 13 12 30 30 41 0.16
11.4055281 2 M14 0.75 14 16 15 14 35 35 48 0.26
11.4055460 3.2 M16 1 16 16 15 14 35 35 48 0.3
11.4055342 4.8 M18 1.2 18 18 17 16 40 40 55 0.4
11.4055343 6 M20 1.5 20 18 17 16 40 40 55 0.39
11.4055394 8 M24 2 24 22 21 20 50 50 70 0.7
11.4055438 12 M30 3 30 28 26 24 60 60 85 1.32
11.4053093 16 M36 4 36 40 43 38 90 100 130 5.65
11.4053095 24 M42 6 42 40 43 38 90 100 130 5.5
11.4053098 32 M48 8 48 40 43 38 90 100 130 5.3

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download