The aluminium ferrule K (Konit™) are made from a special designed profile. The K ferrule has been validated according to TALURIT™ splicing system requirements. The ferrule are produced from seamfree extrucions which are extruded seamlessly over mandrel and the aluminium alloy is EN AW-5051A according to EN 573-3.

The K ferrule can be used in basic applications, with bright or galvanized single layer steel wire ropes with round strands up to fill factor 0,60 and grade 1960. The types of rope lay shall be Ordinary or Lang lay. For fibre core wire ropes larger than 60 mm the maximum rope grade is 1770. Wire ropes shall conform to
EN 12385-4 and 5.

The K ferrule become smaller in diameter after pressing than the T-ferrule. For economic reasons.

  • Material: Aluminum
  • Marking: According to standard
  • Standard: EN 13411-3
Select a row from the table below, then click the add to quote button
Part Code Diameter
10.01TK09 16
10.01TK10 18
10.01TK11 20
10.01TK12 22
10.01TK13 24
10.01TK14 26
10.01TK16 28
10.01TK18 32
10.01TK20 36
10.01TK22 40
10.01TK24 44
10.01TK26 48
10.01TK28 52
10.01TK30 56
10.01TK32 60
10.01TK34 64
10.01TK36 68
10.01TK38 72
10.01TK40 76
10.01TK42 80
10.01TK44 84
Diameter is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.