General: Single stocking with pressed rope eye for pulling or support of ropes and cables. If the stockings are used for support, the eye will be placed on the side so the rope or cable can pass through. The eye can in both cases, on request, be provided with a thimble.
Design: Pleated double wire ropes.


  • Material: Steel wire rope – galvanized.
  • Note:  Substantial safety ratios have been applied to all quoted minimum-breaking strengths. Additional safety factors, determined by application, should be applied. CERTEX recommends a minimum sa
Pulling grip
Support grip
Select a row from the table below, then click the add to quote button
Part Code MBL
t
Grip Ø (mm) L
mm
Weight
kg
CAD
106/6 1.504 6-10 600 0.12
106/10 1.86 10-20 600 0.17
106/20 2.256 20-30 600 0.22
106/30 3.696 30-40 600 0.29
106/40 5.49 40-50 600 0.63
106/50 5.49 50-65 600 0.65
109/65 7.32 65-80 900 1.2
109/80 7.32 80-95 900 1.3
109/95 10.613 95-110 900 2.1

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download