Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper.
  • Marking: According to standard
  • Standard: EN 13411-3
TCU
Select a row from the table below, then click the add to quote button
Part Code Diameter
mm
CAD
10.02TCU01 3
10.02TCU02 3.8
10.02TCU03 4
10.02TCU04 5
10.02TCU05 6
10.02TCU06 7
10.02TCU07 8
10.02TCU08 9
10.02TCU09 10
10.02TCU10 12
10.02TCU11 13
10.02TCU12 14
10.02TCU13 16
10.02TCU14 18
10.02TCU16 20
10.02TCU18 22
10.02TCU20 24

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download