• Ordinary right hand lay
  • Galvanized
  • Rotation resistant
  • Can be used with swivel

ROPETEX S55 is a rotating-resistant steel wire rope consisting of three layers of strands and a (steel) wire strand core. As the outer layer are closed in the opposite direction of the two inner layers this rope is considered as rotating-resistant steel wire rope.
Ropetex S55 is available from 9 to 20 mm and can be used for unguided single part lifting even with great lifting heights.
Ropetex S55 is good to use in several crane types like tower cranes, mobile cranes, electrical hoists and all other applications where a rotation resistant wire rope is required.
If you are searching for a comparable rope in a smaller diameter, look at Ropetex S18. 

  • Rope construction: 35(W)x7
  • Marking: According to standard
  • Temperature range: -40°C up to +200°C, for operating temperatures between 100°C and 200°C reduce MBF by minus 10 %
  • Standard: EN 12385-4
  • Note: Ropes of the class 35x7 have to be replaced always by ropes of the same/comparable class and never by ropes of class 18x7. Whereas ropes of the class 18x7 can be replaced also by ropes of 35x7 from a technical point of view.
  • Fill factor: 0,61
  • RCN: 23-2
  • Mobile crane Information icon
  • Self-erected crane Information icon
  • Tower crane Information icon
  • Luffing crane Information icon
  • Overhead cranes For the use with overhead crane
  • Mobile port crane Information icon
  • Deck crane Information icon
  • Jib crane Information icon
  • Truck crane Information icon
35LS[new] [Converted]_225mm
Select a row from the table below, then click the add to cart button
Part Code Rope diameter
Steel Area
Min. breaking force
1960 N/mm²
01.G30245090G 9 38.9 57.2 36.8
01.G30245100G 10 48 70.6 45.4
01.G30245120G 12 69.1 102 65.4
01.G30245130G 13 81.1 119 76.7
01.G30245140G 14 94.1 138 89
01.G30245150G 15 108 159 102
01.G30245160G 16 123 181 116
01.G30245180G 18 156 229 147
01.G30245190G 19 173 255 164
01.G30245200G 20 192 282 182

info / downloads