Powertex

General: Wire rope grip type Powertex is approved for lifting if assembly is carried out according to instruction manual. The wire rope grip to be used with 6 and 8 strand steel wire ropes with steel or fibre core with tensile strength up to 1960 N/mm2. Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).
Design: PG-4, 6, 8, 10 are drop forged. PG-12, 16, 20, 25, 35 are casted.

  • Finish: Galvanized.
  • Note: Wire ropes for general applications with fiber or steel core with max strength of 1960 N/mm2.
  • Warning: Follow the fitting instructions in the user manual before use. Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
2201_225mm_2
Powertex wirelås
Select a row from the table below, then click the add to quote button
Part Code Code Thread No. of clamps when lifting* Torque
Nm
Wire Ø
mm
Weight
kg/100pc
CAD
10.17PWRG04 PG-4 M5 3 5 3-4 5
10.17PWRG06 PG-6 M6 3 9 5-6 10
10.17PWRG08 PG-8 M6 3 9 7-8 14
10.17PWRG10 PG-10 M8 3 23 9-10 25
10.17PWRG12 PG-12 M8 3 23 10-12,5 32
10.17PWRG16 PG-16 M10 3 45 13-16,5 58
10.17PWRG20 PG-20 M12 3 75 17-20 95
10.17PWRG25 PG-25 M16 3 190 21-25 164
10.17PWRG35 PG-35 M16 3 190 26-35 370

* Minimum number of grips required to fulfill 80% of the rope MBL can vary, and must be according to local regulations (see local language).

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download