Codipro

General: The double swivel ring DSR UP has been especially designed to guarantee liftings under load. Its double articulation allows it to line up perfectly with the sling.

Features:

  • Swiveling under load
  • Usable for any kind of lifting operation
  • Two ways of tightening:- Allen key or Torque wrench(also for external hex)
  • The tightening torque is stamped on all lifting rings in the GRADUP range.
  • Material: High tensile steel
  • Marking: According to standard, CE-marked
  • Standard: EN 1677-1
  • Safety factor: 5:1
Product Picture 1
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Thread StandardL1
mm
Torque
Nm
S1
mm
S2
mm
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
Weight
kg
CAD
11.41DSRM10 0.7 M10 (x1.50) 18 10 8 16 33 30 30 38 27 14 53 9,5 0.3
11.41DSRM12 1.05 M12 (x1.75) 21 15 8 16 33 30 30 38 27 14 53 9,5 0.3
11.41DSRM14 1.4 M14 (x2) 23 30 8 20 45 40 45 53 38 17 76 13 0.9
11.41DSRM16 2 M16 (x2) 27 50 8 20 45 40 45 53 38 17 76 13 0.9
11.41DSRM20 2.5 M20 (x2.5) 30 100 8 20 45 40 45 53 38 17 76 13 0.9
11.42DSRM22UP 3.5 M22 (x2.5) 33 120 14 24 62 55 60 83 55 25 115 19 2.6
11.42DSRM24UP 4.4 M24 (x3) 36 160 14 24 62 55 60 83 55 25 115 19 2.6
11.42DSRM27UP 5.7 M27 (x3) 40 200 14 24 62 55 60 83 55 25 115 19 2.7
11.42DSRM306T3UP 6 M30 (x3.5) 45 250 14 24 62 55 60 83 55 25 115 19 2.7
UNC thread also available: from UNC 1/4" to UNC 1"1/4

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download